All

A safe and compact digital multiposition magnetic stirrer with heating available in 6 and 15 positions.

Programmable high/low speed stirring with memory profiles, 4 positions, 10-1200 rpm

Ohaus Chuck Cover e-A51, Clamp Double, or Clamp Ribbon for Achiever™ 5000 overhead stirrers

Rugged, compact units that stir up to 1000 mL of liquid. Optional automatic stirrer feature

Powerful Motor and Magnet Mixes Samples 25L to 200 L

Synchronized and Uniform Mixing, accommodates up to 9 x 250 mL or 4 x 1 L flasks

Telescopic-H or Universal-H Support Stands for Achiever™ 5000 overhead stirrers

Double or Ribbon clamps, Probe extension cable, Temperature probe, and Stand

Folds for narrow necked vessels

Stainless Steel or PTFE coated

Stainless Steel or PTFE coated

Stainless Steel or PTFE coated

3 meter cable 2 RS 232/9/M/F

Plate size 12inches x 8inches. Rod length 26inches.

For the MS-S Stirrer or the MS-H-Pro/MS-H-S Stirrers

For RET control-visc. Glass-coated for aggressive media such as acid and alkaline solutions

For RET control-visc. Coated with SafeCoat

Two separate steel sensors for heat transfer fluid and medium.

Made of stainless steel, for use with RCT basic, RET basic and C-MAG HS digital series.

Glass-coated temperature sensor for work with aggressive media such as acid and alkaline solutions.

Made of stainless steel, for use with RCT basic, RET basic and C-MAG HS digital series.

For use with RCT basic, RET basic and C-MAG HS digital series.

Propeller, turbine, hafmoon, centrifugal, anchor, and paddle impellers

PTFE coated from 1" to 4" with optional pivot ring or egg shape

Powerful multi-position stirring for up to 4 vessels at 2L each simultaneously, 250-1300 rpm

Mix and match reaction vessel volumes from 4mL to 30mL

Radial flow, draws from top and bottom. High turbulence and shearing. Stirrer dia 80 mm

Radial flow, draws from top and bottom. High turbulence and shearing. Stirrer dia 100 mm

Radial flow, draws from top and bottom. High turbulence and shearing. Stirrer dia 42 mm

Draws material from above. Generates axial flow. Stirrer dia 30 mm. Minimum shearing

Draws material from above. Generates axial flow. Stirrer dia 50 mm. Minimum shearing

Draws material from above. Generates axial flow. Stirrer dia 70 mm. Minimum shearing

Tangential flow, high shearing. Ideal for medium to highly viscous fluids. Stirrer dia 45 mm

Tangential flow, high shearing. Ideal for medium to highly viscous fluids. Stirrer dia 90 mm

Tangential flow, high shearing. Ideal for medium to highly viscous fluids. Stirrer dia 150 mm

For drawing from top to bottom. Local shearing forces. Generates axial flow. Stirrer dia 50 mm

For drawing from top to bottom. Local shearing forces. Generates axial flow. Stirrer dia 100 mm

Blades open with speed for round vessels with narrow necks. Stirrer dia 60 / 15 mm

Blades open with speed for round vessels with narrow necks. Stirrer dia 100 / 24 mm

Tangential flow, minimum turbulence, good heat exchange, gentle. Stirrer dia 70 mm

Tangential flow, minimum turbulence, good heat exchange, gentle. Stirrer dia 150 mm

Flow-efficient, for drawing from top and bottom. Minimum shearing. Stirrer dia 45 mm

Flow-efficient, for drawing from top and bottom. Minimum shearing. Stirrer dia 55 mm

Flow-efficient, draws from top and bottom. Minimum shear. Stirrer dia 45mm length 550 mm

Flow-efficient, draws from top and bottom. Minimum shear. Stirrer dia 45mm length 800 mm

Flow-efficient, draws from top and bottom. Minimum shearing. Stirrer dia 75mm. PTFE-coated.