IKA

27 mm round PTFE coated 110 mm length

27 mm round PTFE coated 153 mm length

For low speeds in cell/tissue culture applications. No shear effect on the bottom of the vessel

Strong turbulence at relatively low speeds. Reduced surface contact and outstanding centering

Stable quiet stirring even at high speeds. Creates deep turbulence for fast and efficient mixing.

Symmetrical laminates allow use in tall vessels with small diameters. Ideal for cuvettes or test tubes.

Well-suited for use in round beakers, form ensures homogeneous mixing.

Prevents absorption of solution or contamination. Suitable for highly abrasive and high-temp applications

Highly magnetic (rare earth samarium-cobalt) allows for greater torque than conventional stir bars

Cylindrical form without pivot ring ensures even mixing in flat bottom vessels, 10-80mm lengths

Pivot ring provides outstanding centering and consistent mixing for uneven or curved bottom

For raising and supporting laboratory devices or vessels under 15 lbs from 70-300 mm

Advanced software program for measuring, controlling and regulating your laboratory equipment

3 meter cable 2 RS 232/9/M/F

For RET control-visc. Glass-coated for aggressive media such as acid and alkaline solutions

For RET control-visc. Coated with SafeCoat

Two separate steel sensors for heat transfer fluid and medium.

Made of stainless steel, for use with RCT basic, RET basic and C-MAG HS digital series.

Glass-coated temperature sensor for work with aggressive media such as acid and alkaline solutions.

Made of stainless steel, for use with RCT basic, RET basic and C-MAG HS digital series.

For use with RCT basic, RET basic and C-MAG HS digital series.

Radial flow, draws from top and bottom. High turbulence and shearing. Stirrer dia 80 mm

Radial flow, draws from top and bottom. High turbulence and shearing. Stirrer dia 100 mm

Radial flow, draws from top and bottom. High turbulence and shearing. Stirrer dia 42 mm

Draws material from above. Generates axial flow. Stirrer dia 30 mm. Minimum shearing

Draws material from above. Generates axial flow. Stirrer dia 50 mm. Minimum shearing

Draws material from above. Generates axial flow. Stirrer dia 70 mm. Minimum shearing

Tangential flow, high shearing. Ideal for medium to highly viscous fluids. Stirrer dia 45 mm

Tangential flow, high shearing. Ideal for medium to highly viscous fluids. Stirrer dia 90 mm

Tangential flow, high shearing. Ideal for medium to highly viscous fluids. Stirrer dia 150 mm

For drawing from top to bottom. Local shearing forces. Generates axial flow. Stirrer dia 50 mm

For drawing from top to bottom. Local shearing forces. Generates axial flow. Stirrer dia 100 mm

Blades open with speed for round vessels with narrow necks. Stirrer dia 60 / 15 mm

Blades open with speed for round vessels with narrow necks. Stirrer dia 100 / 24 mm

Tangential flow, minimum turbulence, good heat exchange, gentle. Stirrer dia 70 mm

Tangential flow, minimum turbulence, good heat exchange, gentle. Stirrer dia 150 mm

Flow-efficient, for drawing from top and bottom. Minimum shearing. Stirrer dia 45 mm

Flow-efficient, for drawing from top and bottom. Minimum shearing. Stirrer dia 55 mm

Flow-efficient, draws from top and bottom. Minimum shear. Stirrer dia 45mm length 550 mm

Flow-efficient, draws from top and bottom. Minimum shear. Stirrer dia 45mm length 800 mm

Flow-efficient, draws from top and bottom. Minimum shearing. Stirrer dia 75mm. PTFE-coated.

For use with EUROSTAR 20 high speed digital. Working range: 1 - 30L Dia 55 mm

For use with EUROSTAR 20 high speed digital. Working range: 1 - 30L Dia 42 mm

For use with EUROSTAR 20 high speed digital. Working range: 0.25 - 30L. Dia 45 mm

Cast aluminium with clamping range: 6-16 mm

For drawing material from top to bottom. Local shearing forces. Stirrer dia 150 mm

Tangential flow, minimum turbulence, good heat exchange, gentle Stirrer dia 150 mm

Cast aluminum, clamping range: stand 25-36 mm; extension arm: 5-21 mm